Gold dressing process

Different gold nature using different mineral processing technology

Recommended solution

Gold content is very low in ore. To extract gold, need crush and grind ore and use mineral processing technology to pre concentrate or separate gold. For gold dressing, the gravity separation, flotation and cyaniding are widely used. The CIL are widely used in Africa.

  • Gold CIL process
  • Gold flotation process
  • Gold cyanide process
  • Zinc powder replacement gold extracting process
  • Extraction of gold by heap leaching
  • Gold gravity separation process
  • Gold CIL process
    Active carbon adsorb the liquid state gold in alkaline cyaniding solution
    Process description:

    Cyanidation ---carbon adsorption process is the most widely used in gold cyanide extraction process . The principle in brief is the carbon could adsorb liquid gold from cyanide solution .

    Detail >
    Application:

    The gold CIL process is mainly used in the oxide ore which has low grade of silver , its more economize and has more benefit .

    Detail >
    Typical cases
    Sudan Sahara 500t/d CIL plant
  • Gold flotation process
    Process high flotability gold sulphide ore.
    Process description:

    Flotation is a method that is widely used in gold ore processing plant to process the rock gold , commonly used in dealing with highly floatable sulfide minerals containing gold ore. Flotation...

    Detail >
    Application:

    Flotation is suitable for processing the gold-bearing sulfide ore which with fine and floatable gold particles , during flotation , sulfide ore act as the carrier of gold...

    Detail >
    Typical cases
    Ecuador 300 d/t gold flotation
  • Gold cyanide process
    Use cyanide as lixivium to extract gold.
    Process description:

    Chemical property of gold is very stable , but it has a character , when it is in the editpotassium cyanide solution , and filling the air , gold will become soluble cyaniding liquid .

    Detail >
    Application:

    Gold mine in flotation process or mercury amalgam，tailings in gravity process ,oxide mineral with pulp and gold extraction plant with cyaniding agitation .

    Detail >
    Typical cases
    Australia 2000t/d gold project
  • Zinc powder replacement gold extracting process
    Add zinc into the pregnant solution containing gold, the gold and silver will settle in gold mud via chemical reaction.
    Process description:

    It is an old cyanidation process. Firstly, add cyanide into ore to leach out minerals, then separate the solid and liquid. Add zinc powder or zinc wire into the liquid and the gold and silver will...

    Detail >
    Application:

    It mainly include medicating & aeration, agitation leaching, backwashing, zinc powder replacement, gold mud smelting, tailing filter pressing, swage treatment, etc.

    Detail >
    Typical cases
    Myanmar 1000t/d CIP plant
  • Extraction of gold by heap leaching
    Spray the low concentration cyanide or thin vitriol etc. on stock heap to solve the gold, then use other way to recovery.
    Process description:

    Pump leaching is a process that grind gold mine with low grade to a certain particles , heap up on the leakage-proof bottom mat that concreted by pitch , concrete or plastic cloth , spray the low...

    Detail >
    Application:

    Heap leaching is a process that use to treat the gold mine with low grade , cause it`s process simple , easy operation , low energy consumption , investment saving...

    Detail >
  • Gold gravity separation process
    Cyanidation-carbon adsorption process is widely used in gold cyanide extraction process.
    Process description:

    The gravity separation process create a comfortable loose layer and separation condition in virtue of integrating...

    Detail >
    Application:

    gravity process is a traditional and basic method to separate gulch-gold , and it`s the most effective process...

    Detail >
    Typical cases
    Zimbabwe 400t/d gold project
Powerful technical support
Design and research institute
Devote to gold mineral processing technology researching for 30 years
Unique design, custom-made
get the maximum profit from mines.

By the way of continuously technology research and development, design and research institute get remarkable achievement in gold mineral processing technology, at the same time, the research achievement in refining of nonmetal, various oxide ore recovering, comprehensive utilization etc. is also in international first-class level.

Detail >
Laboratory
The origin of mining process

The oxide species of Jinpeng Laboratory are adaptive , high speed oxidation , the refractory ore after oxidation , the recovery rate could be 92%-95%，increase 40%-70% recovery rate than cyanidation , this is a break for refractory ore processing . over the years, constantly create new technology, fill the domestic blank, and won numerous domestic awards.

Detail >
Precious experimental test , costom-made the best process
The excellent gold processing expert in mining field
View all team >
Gold processing equipment
More equipment >
Strive to be the best EPCM supplier in the world
Project Footprint

Canada

Typical case
Canada 2200 t/d CIL plant

Location:Ontar

Scale:2200t/d

Time:under construction

Guatemala

Typical case
Guatemala 300 d/t CIL plant

Location:Guatemala

Scale:300t/d

Time:Under construction

Honduras

Typical case
Honduras 500 t/d gold flotation plant

Location:Honduras

Scale:500 t/d

Time:08/2014

Ecuador

Typical case
Ecuador 300 d/t gold flotation

Location:Quito

Scale:300 t/d

Time:11/2012

Peru

Typical case
Peru's 200 t/d polymetallic ore flotation plant

Location:Chimbote

Scale:200 t/d

Time:08/ 2012

Brazil

Typical case
Brazil 100m³/h dry placer gold project

Location:Macapagal

Scale:500 t/d

Time:12/2016

Ghana

Typical case
Ghana 1000 t/d gold project

Location:Ghana

Scale:1000t/d

Time: 08/2016

Sudan

Typical
Sudan 500t/d CIL plant

Project Location:Sudan

Scale:500 t/d

Eritrea

Typical case
Eritrea 2000 t/d gold plant

Location:Eritrea

Scale:500 t/d

Time:05/2014

Zimbabwe

Typical case
Zimbabwe 400t/d gold project

Location:Zimbabwe

Scale:400 t/d

Time:09/2014

Tajikistan

Typical case
Tajikistan 4000t/d gold project

Location:WaHeDa

Scale:4000t/d

Time:08/2015

Yantai

Myanmar

Typical case
Myanmar 1000t/d CIP plant

Location:Mandalay

Scale:1000 t/d

Time:03/2016

Laos

Typical case
Laos 500 t/d gold ore dewatering project

Location: Laos

Scale:500 t/d

Malaysia

Typical case
Malaysia 1000t/d gold plant

Location:Terengganu

Scale:500 t/d

Time:06/2015

Australia

Typical case
Australia 2000t/d gold project

Location:Galveston

Scale:2000t/d

Time:08/2014

Wherever there is gold mine there is Jinpeng manufacturing

Please write what you need, we will contact you asap!
Product:
  • Mineral processing test
  • Mine equipment
  • Mine design
  • EPCM All-inclusive
  • Tailings processing
  • Accessories
  • Other
Ore:
  • Gold
  • Silver
  • Copper
  • Iron
  • Zinc
  • Manganese
  • Chromium
  • Nickel
  • Tin
  • Antimony
  • Tungsten
  • Fluorite
  • Phosphorite
  • Quartz sand
  • Potassium feldspar
  • Graphite
  • Lithium
  • Barite
  • Multi-metal
  • Other

Your name

Your email

Your phone number

Capacity: (t/d or t/h)

Your need

?Consultation

Service Hotline :
+86-18710015196

Copyright©2024 YanTai JinPeng Mining Machinery Co., Ltd.

Legal Notice? Contact Us